ESP Wellhead Completions at the Ready!
While we are known for our leading and most reliable ESP penetrator, we also stock a full line of 7-1/16” 3,000 psi to 15,000 psi wellhead completion solutions. These systems feature our leading slim P3000-2 penetrator system and can be used with 2-3/8”, 2-7/8”, and 3-1/2” tubing inside the 7-1/16” bowl profile with suitable sized production casing. We can also supply 11” completions, along with GT-6, and hammer nut completions for use with our penetrator.
Good – ESP Hanger Completion with P3000-2 Penetrator
Hanger completions offer a low cost solution while maintaining well control through a BOP during installation. Hangers are available with, and without, Type H BPV threads to serve your SOP requirements. A short nipple is used to make up a threaded Christmas tree or a companion flange that can adapt to a flanged tree.
Better – ESP Hanger with Cover Plate and P3000-2 Penetrator
The Cover Plate system offers the same abilities as the hanger completion with a 3,000 psi secondary seal for both environmental and well control. The cover plate protects both the ring groove and lock screws to ensure future rework can be accomplished without issues. The P3000-2 system can be used with 2-3/8”, 2-7/8”, and 3-1/2” tubing inside the 7-1/16” bowl profile.
Best – ESP Hanger & Adapter with P3000-2 Penetrator
ESP Hanger and Adapter completions offer the most control and versatility. The adapter allows for testing the flange void after make-up. This ensures all sealing components are holding. With a spin flange on the bottom and an orientation flange on top, pump cable alignment and flow line orientation can be achieved with great ease. All hangers come ported to accommodate up to 1/2” capillary line, if required.